Goldvestthai uses cookies to manage personal data and deliver the best content experience to our website visitors. If you continue to use the website without making any changes to your settings, we will assume that you consent to accept cookies on our website and acknowledge our privacy policy
Electrohydraulic Dock Leveler with Telescopic Lip
Electrohydraulic Dock Leveler with Telescopic Lip employs a hydraulic lifting system using electricity for control. They come with telescopic lip that extends the length of the leveler to connect with the loading truck. When in use, the leveler will lift up and the edge will extend until it reaches the end of the loading vehicle. Once loading is finished, the telescopic lip will retract and the leveler will descend to the original position.
Feature
- The length of the lip is 500/1000 mm;
- When working with truck that has a skew, the side tilt is possibile to 100 mm;
- Due to yellow-black signal strip, one can see that the platform is above the level of the ramp;
- The surface of the platform is made of lentil sheet to provide a better adhesion of the forklift wheel;
- Provides safe transverse movement on the leveler;
- Safety system instantly stops the hydraulic leveler in the case of hose breakage or unauthorized departure of the vehicle during operations;
- Locking mechanism ensures a safe leveler maintenance and repair.
Specification
| Dimensions / Features | |
|---|---|
| Length, mm | 2500 / 3000 / 3500 / 4000 |
| Width, mm | 20000 / 22000 / 2400 |
| Working rage | |
| • above the dock, mm | 0-480 mm |
| • below the dock, mm | 0-430 mm |
| Colour* | Signal blue (RAL 5005) |
| Amount of lift cylinders | 2 |
* Power coating with preliminary shot blasting.
| Performance | |
|---|---|
| Load capacity | 6000 kg / 10000 kg |
| Motor hydraulic unit | 1,1 kw |
| Supply voltage | 380V, 3 phases |
| Control voltage | 24V |
| Control unit protection rating | IP54 |
| Working fluid | Mobil DTe10 eXCEL |
| Class of surface cleaning before painting | SA2 |
| Operation temperature range | from -30 to 50 °С |
| Package | ||
|---|---|---|
| Standard | Option | |
| Mounting type | Embedded / Suspended | Other upon request |
| Colour | Signal blue (RAL 5005) | Other upon request |
| Lip | Length - 500/1000 mm | Segmented lip / tapered lip |
| Hydraulic system | 2 lift cylinder, 1 lip control cylinder | Oil for operation at low temperature oil-50°С |
| Seal | PVC-seal along perimeter | For dock levelers > 3000 mm |
| Load capacity | 6000/10000 kg | Other upon request |
| Working range | From-350 to 550 mm | Other upon request |
Construct and size
- 1. Platform cover
- 2. Lip
- 3. Frame
- 4. Signal black and yellow stripes
- 5. Hydraulic pump
- 6. Lifting cylinder
- 7. Cylinder ramp
- 8. Backup repair
- 9. Front PVC-curtain
- 10. Control unit
Dock leveler surface is made of embossed steel sheet with a thickness of 8-10 mm, where the embossing height is 0.8-3 mm. Dock levelers with telescopic lip may be produced with embossed steel sheet of 8 mm thickness with embossing height is 0.8-2.4 mm, in cases when standard forklifts will be used during loading and unloading operations. Dock levelers made with embossed steel sheet of 10 mm thickness and embossing height of 1-3 mm can be produced in cases when the load on the platform is up to 10,000 kg. There might be a potential distortion of the platform, which does not affect product operation.
The lip is made of embossed steel sheet of 12 mm thickness where the embossing height is 1,2-3,6 mm. The longitudinal beams may be made of 100-120 mm or L-shaped profile with dimensions 187x70x4 mm, the frame of U-profile 100-120 mm.
You May Also Like
- arrow_back_ios_new
- arrow_forward_ios